Take careful precaution to only
use the ACTIVATE cycle for
treating your botanicals – free of
any oil, butter or liquids.
Activate Instructions
6. Removing the Basin from the machine base
will automatically pause the cycle. The cycle will
resume once the basin is put back in place and
START is pressed.
7. Your LĒVO C will display WARMING UP as it
preheats to the programmed temperature and then
begin the selected cycle when the preset
temperature has been reached. During the cycle,
the display will show REMAINING TIME and
CURRENT TEMPERATURE.
8. Your LĒVO C will display COMPLETE when the
timer is up and your activation is complete. To
manually end the cycle press pause followed by
ACTIVATE or INFUSE.
9. Having activated your botanical ingredients, now
is a great time to infuse. Check out INFUSION
INSTRUCTIONS, above.
1111
To Next Page
Loading...
Need help?
General
