17
Storing
Reassembling
1. Flip the water tank over and replace the
noise silencer on the tank. [Figure 3.15]
2. Refill the tank, if necessary. Replace the
water tank cap by firmly twisting it back
in place, aligning the arrow with the
lock. [Figure 3.16]
Figure 3.15
Figure 3.17
Figure 3.18
3. Store the brush in the brush storage
slots in the base. [Figure 3.17]
Figure 3.16
4. Place the tank properly on the base and
replace the nozzle cover onto the water
tank. [Figure 3.18]
Follow the cleaning instructions (see page 13)
and allow all parts to dry completely before
storing. Store in a cool, dry location.
02.02_ML_HTHOHIHC03DL_Classic200_UltrasonicCoolMistHumidifier.indd 1702.02_ML_HTHOHIHC03DL_Classic200_UltrasonicCoolMistHumidifier.indd 17 2/10/20 12:58 PM2/10/20 12:58 PM
To Next Page
Loading...
