13
EN
Figure 3.11
Figure 3.12
Descaling Your Humidifier (cont.)
6. Remove the float from the base
chamber by pulling up the larger side
of the float [
Figure 3.11
] and pulling
the shaft out from the float brackets.
One side of the float brackets is
open (U-shaped) to allow removal.
[
Figure 3.12
]
7. Place the float, water filter, and noise
silencer in a small container. Fill with
enough vinegar to cover them. Soak for
15–20 minutes.
8. Use the cleaning brush and a soft cloth
to remove scale from all parts.
9. Rinse all parts until any vinegar smell is
completely gone.
10. Completely dry all parts with a cloth
before reassembling.
To Next Page
Loading...
