14
EN
Reassembling
1. Flip the water tank over and place the
noise silencer back into the tank.
[
Figure 3.13
]
2. Place the water filter back into the tank
and rotate it clockwise to secure it in
place. [
Figure 3.14
]
Figure 3.13
Figure 3.14
Figure 3.15
c. Place the larger prong into the
open (U-shaped) side of the float
brackets.
4. Place the tank back on the base and
place the cover on top.
b. Insert the smaller prong into the
closed side of the float brackets.
[
Figure 3.16
]
Figure 3.16
Storing
Follow the cleaning instructions (see page
11) and allow all parts to dry completely
before storing. Store in a cool, dry location.
3. Place the float back into the base
chamber:
a. Make sure the correct side of the
float is facing up. [
Figure 3.15
]
To Next Page
Loading...
