Levoit Dual 200S - Controls and Display Guide; Power Button Operation; Wi-Fi Indicator Status; No Water Indicator Function

7
CONTROLS & DISPLAY
Note: You can also control these functions using
the VeSync app, as well as additional functions
(see page 13).
Power Button
• Press to turn the humidifier
on/o.
• Press and hold for 5
seconds to pair with the
VeSync app. See the
VeSync in-app instructions
for more information.
• Press and hold for 15
seconds to reset the
humidifier. This will restore
the humidifier’s default
settings and disconnect
it from Wi-Fi® and the
VeSync app (see page 11).
Wi-Fi Indicator
• Turns on, o, or blinks to
indicate pairing status.
See the VeSync in-app
instructions for more
information.
No Water Indicator
• Blinks when there is no
water in the tank or the
tank is removed. After this
indicator blinks 10 times,
the humidifier will turn o.
Refill the tank and properly
place it on the base to use
your humidifier.
Mist Level Button
• Press repeatedly to cycle
through mist level settings:
Low, High, and Auto Mode.
(For more details on Auto
Mode, see page 13.)
• Press and hold for
3 seconds to turn o
the humidifier display.
This will automatically
change the mist level
setting to Auto Mode.