Levoit LUH-A602S - Using Your Smart Humidifier; Basic Operation and Mist Control

USING YOUR SMART HUMIDIFIER
1. Plug in the humidifier. The humidifier will
light up, then turn o.
2. Press to turn your humidifier on. The
humidifier will start misting.
Figure 3.1
Note:
• Direct the nozzles away from any
furniture, walls, or other objects to
prevent them from getting wet.
• Do not inhale the mist directly from
the nozzles.
Note: Using the VeSync app allows you to
control your smart humidier remotely and
access additional functions and features
(see page 16).
Note: If there is no water in the tank,
will ash 10 times, and the humidier will
turn o. Fill the water tank (see Getting
Started, page 9).
Note: You can also set the humidier
to automatically stop misting when the
room reaches a specic humidity level
(see Humidity Level, page 13).
3. Press repeatedly to cycle through
mist settings: Low, Medium, and High.
4. Rotate the nozzles to adjust the direction
of the mist. [Figure 3.1]
5. Optionally, use the controls or the
VeSync app to turn on warm mist,
activate Sleep Mode, and more (see
Controls, page8).
6. When your room has reached your
preferred humidity level, turn the
humidifier to a lower setting, or turn it o.
A comfortable humidity level is between
40% and 60%.
7. Press to turn your humidifier o.
EN
12