EasyManua.ls Logo

Levoit LUH-D301S-WUK - Controls and Display; Control Button Functions; Indicator Lights and Reminders

Levoit LUH-D301S-WUK
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
CONTROLS & DISPLAY
Note:
You can also control these functions using
the VeSync app, as well as additional functions
(see page 12).
Power Button
• Press to turn the humidifier
on/o.
• Press and hold for 5
seconds to pair with the
VeSync app. See the
VeSync in-app instructions
for more information.
• Press and hold for 15
seconds to reset the
humidifier. This will restore
the humidifier’s default
settings and disconnect
it from Wi-Fi® and the
VeSync app (see page 10).
Wi-Fi Indicator
• Turns on, o, or blinks to
indicate pairing status.
See the VeSync in-app
instructions for more
information.
No Water Indicator
• Blinks when there is no
water in the tank. After this
indicator blinks 10 times,
the humidifier will turn o.
Refill the tank and properly
place it on the base to use
your humidifier.
• Lights up when the
water tank is removed.
Remains on until the
tank is replaced.
Mist Level Button
• Press repeatedly to cycle
through mist level settings:
Low, High, and Auto Mode.
(For more details on Auto
Mode, see page 12.)
• Press and hold for
3 seconds to turn o
the humidifier display.
This will automatically
change the mist level
setting to Auto Mode.
Cleaning Reminder
• After the humidifier has
been in use for a total of
72 hours, the next time you
turn on the humidifier, it will
beep and the display will
read “CL” as a reminder to
clean the humidifier. Clean
the humidifier before using
it again (see page 14).
• Press any button to reset
the reminder. Unplugging
the humidifier will also
reset the reminder.