Levoit LV-PUR131 - ABOUT THE FILTERS; Fine Preliminary Filter; True HEPA Filter; Activated Carbon Filter

7
Press the Speed button to cycle
through the unit’s fan speeds:
Low, Normal and High.
The Timer button allows you to
set the air purifier to run from 1-12
hours. To set the timer, press the
Timer button to cycle through
the dierent time settings. When
you reach your desired time, the
display will flash 3 times before
setting. The unit will automatically
power o once the timer is
finished. To cancel the timer, press
the Timer button until the display
reads “-:--,” and wait until “-:--”
flashes 3 times.
NOTE: Fan speed cannot be adjusted while on Auto or
Sleep Mode.
Press the Auto button to activate
and deactivate the air purifier’s
automatic sensor mode. The
automatic sensor adjusts the air
purifier’s fan speed according to
the current air quality to provide
clean air for your living space.
The air quality indicator will also
illuminate on the LED display; the
table below shows the dierent
colors of the air quality indicator in
correlation to both air quality & fan
speed. The air purifier will return
to its default Low Speed when
Auto Mode is turned o.
NOTE:
• Sleep Mode cannot be activated while on Auto Mode.
• Press the Auto button to exit out of Auto Mode.
Color Air Quality Fan Speed
Red Bad High
Yellow Moderate Medium
Green Good Low
Blue Very Good Sleep Mode