11
1. Press once. The
display will show “--.”
• Press to turn on warm mist. Keep
pressing to increase the heat setting for
the mist, and to turn warm mist o.
• Caution: Mist may be hot. Do not place
your bare hands, face, or other exposed
skin over the nozzles while using warm
mist.
• The humidifier may take 15 minutes to
warm up before producing warm mist.
• The warm mist function can be used
with Auto Mode.
USING YOUR HUMIDIFIER (CONT.)
You can customize the humidity level that
the humidifier will maintain.
Humidity LevelWarm Mist
FLASH 5x
Note:
• After setting the RH percentage,
the display will alternate between
showing the set RH percentage and
the current humidity percentage.
• To cancel your selection, press and
hold for 3 seconds.
Warm Mist Chart
Icon Setting
Low Heat
Medium Heat
High Heat
2. Keep pressing
to set a humidity
level between 40%
and 80% Relative
Humidity (RH).
3. The display will flash
5 times to confirm
your selection.
4. Once the humidity of the environment
reaches the set RH percentage, the
humidifier will automatically stop
misting. It will start misting again when
the humidity drops to 5% below the set
level.