11
USING YOUR SMART HUMIDIFIER
1. Plug in the humidifier. The humidifier will
light up, then turn o.
2. Press to turn your humidifier on. The
humidifier will start misting.
Figure 3.1
Note:
• Direct the nozzles away from any
furniture, walls, or other objects to
prevent them from getting wet.
• Do not inhale the mist directly from
the nozzles.
Note: Using the VeSync app allows you to
control your smart humidifier remotely and
access additional functions and features
(see page 15).
Note: If there is no water in the tank,
will flash 10 times, and the humidifier will
turn o. Fill the water tank (see Getting
Started, page 8).
Note: You can also set the humidifier
to automatically stop misting when the
room reaches a specific humidity level
(see Humidity Level, page 12).
3. Press repeatedly to cycle through
mist settings: Low, Medium, and High.
4. Rotate the nozzles to adjust the direction
of the mist. [Figure 3.1]
5. Optionally, use the controls or the
VeSync app to turn on warm mist,
activate Sleep Mode, and more (see
Controls, page7).
6. When your room has reached your
preferred humidity level, turn the
humidifier to a lower setting, or turn it o.
A comfortable humidity level is between
40% and 60%.
7. Press to turn your humidifier o.
To Next Page
Loading...
Need help?
General
