EasyManua.ls Logo

Levoit Pet Care True HEPA Core P350 - About the Pet Allergy Filter

Levoit Pet Care True HEPA Core P350
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
EN
A. Fine Non-Woven Fabric Pre-Filter
Captures large particles such as dust,
lint, fibres, hair, pet fur, and pet dander.
Maximises the filter’s life.
B. True HEPA Filter
Removes at least 99.97% of airborne
particles 0.3 micrometres (µm) in
diameter.
Filters small particles such as mould
spores, tiny dust particles, parts of
smoke, and allergens such as pollen,
dust mites, and pet dander.
C. Custom High-Eciency Activated
Carbon Filter
Physically adsorbs unwanted odours
and fumes.
Customised using the ARC formula to
decompose cooking smells and pet
odours and prevent them from being
released. This formula also extends
the life of the filter.
Sleep Mode
Sleep Mode operates quietly by using the
lowest possible fan speed.
Tap
to turn Sleep Mode on/o.
Timer
You can set a timer for 2, 4, 8, or 12 hours.
1. Tap
repeatedly to select a time. The
timer will start automatically.
USING YOUR PURIFIER CONT.
Note:
You can change the fan speed at any
time while the timer is on.
The timer will restart if the time is
changed.
Note: You can turn the display on and o
even if the display is locked.
ABOUT THE PET
ALLERGY FILTER
The air purifier uses a 3-stage filtration
system to purify air, with special customisation
for pet allergies and odours.
A
B
C
2. Once the timer has finished, the air
purifier will power o.
3. To cancel a timer, tap
until all timer
indicators are o.
Note:
The indicators are not buttons and
cannot be used to select a time.
The timer indicators will light up blue
when active.
Note:
All indicators will be at half brightness
while Sleep Mode is on.
Tapping will exit Sleep Mode.
Pet Lock
Locking the display prevents settings from
being accidentally changed, such as by
children or pets. Buttons will not respond
when tapped.
1. Tap and hold
for 3 seconds to lock/
unlock the display.

Related product manuals