Levoit Smart True HEPA Core 300S Series User Manual

5
CONTROLS
On/O Button
• Turns the air purifier on/o.
• Press and hold to configure
the air purifier. See the
VeSync in-app instructions
for more information.
Fan Speed Button
• Cycles through fan speeds:
I (low), II (medium), and III
(high).
• Tapping the Fan Speed
Button while the air purifier
is in Sleep Mode or Auto
Mode will exit that mode.
WiFi Indicator
• Turns on, o, or blinks to
indicate pairing status.
See the VeSync in-app
instructions for more
information.
Sleep Mode Button
• Turns Sleep Mode on (see
page 8).
• Press and hold for 3
seconds to reset the Check
Filter Indicator.
Timer Button
• Cycles through timer
options (see page 9).
• Holding for 2 seconds
allows you to cycle through
the timer options faster.
Display Lock Button
• Prevents current settings
from being changed (see
page 9).
• Blinks when any other
button is tapped to indicate
that Display Lock is on.
Auto Mode
• Turns Auto Mode on (see
page 8).
Check Filter Indicator
• Lights up when the filter
should be checked (see
Check Filter Indicator,
page 13).
• Reset the Check Filter
Indicator by pressing and
holding the Sleep Mode
button for 3 seconds.
Display O Button
• Turns the display o (see
page 9).
• Tap any button (except )
to turn the display back on.

Levoit Smart True HEPA Core 300S Series Specifications

General

Brand	Levoit
Model	Smart True HEPA Core 300S Series
Category	Air Cleaner
Language	English