EasyManua.ls Logo

Levoit Smart True HEPA Core 300S Series - Getting Started Guide; Filter Installation and Unit Placement

Levoit Smart True HEPA Core 300S Series
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
3. Replace the filter cover and twist
clockwise to lock. [Figure 1.3]
Figure 1.3
Figure 1.4
15 in /
38 cm
cover should
snap shut
15 in /
38 cm
GETTING STARTED
1. Flip the air purifier over. Twist the filter
cover counterclockwise and remove it.
[Figure 1.1]
Figure 1.1
Figure 1.2
handle facing up
2. Remove the filter from its plastic
packaging and place the filter back into
the air purifier with the handle facing up.
[Figure 1.2]
4. Place the purifier on a flat, stable surface
with the display facing up. Allow at least
15 in / 38 cm of clearance on all sides.
Keep away from anything that would
block airflow, such as curtains.
[Figure 1.4]

Related product manuals