Levoit Superior 6000S - USING YOUR SMART HUMIDIFIER (CONT.); Humidity, Sleep, and Dry Modes

13
1. Change the target humidity in the VeSync
app.
2. Tap on the display. Continue tapping
to cycle through target humidity options.
1. Tap to turn Sleep Mode on.
Note: You can also turn Dry Mode on/o in
the VeSync app.
Note:
• Sleep Mode automatically turns o the
display except for .
• You can also turn Sleep Mode on/o in
the VeSync app.
You can set a target humidity level from
30–60%, in increments of 5%. There are
several ways to change the target humidity:
Dry Mode uses low and high fan speeds to
dry out the wick filters. This helps extend
the life of the filters by preventing moisture
buildup and mold.
The humidifier will remember your settings
for fan speed, humidity level, Display
O, Sleep Mode, Auto Mode, and Wi-Fi
connection when turned o or unplugged,
and will resume those settings when turned
back on.
The humidifier will automatically turn o
when all of the water in the tank has been
evaporated.
If the humidifier top has been removed from
the water tank, the humidifier will automatically
stop. will show on the display and will turn
o once the humidifier top is placed properly
back on the water tank.
When a timer is set, Dry Mode will
automatically turn on the high fan speed 30
minutes before the timer ends. The humidifier
will stop evaporating water and and
will be illuminated. Optionally, you can set Dry
Mode to turn on automatically in the VeSync
app.
Sleep Mode changes the humidifier’s fan
speed setting to low and turns o the display,
making it ideal for sleep.
Setting Target Humidity Dry Mode
Memory Function
Automatic Shutoff
Sleep Mode
2. When Sleep Mode is on, you can tap any
button to wake up the display. If no other
button is pressed after waking up the
display, the display will turn o again after
6 seconds.
3. Once you wake up the display, tap ,
, or to exit Sleep Mode.
• Tap repeatedly to cycle through
settings: low, high, and o.
• The selected Dry Mode fan speed will
show on the display.
• Low will run the fan for 2 hours.
• High will run the fan for 30 minutes.
• will show on the display and blink
for 10 seconds before the humidifier
turns o.
• Fill the water tank (see Filling &
Refilling, page 10).
USING YOUR SMART HUMIDIFIER (CONT.)