Levoit Superior 6000S - GETTING STARTED

9
Front View
Arrow pointed
to front
GETTING STARTED
1. Remove all parts from the packaging.
A. Water Tank
B. Support Frame
C. Wick Filter Frame
D. Humidifier Top
2. Clean the water tank before first use.
3. Place the support frame on top of the
water tank.
Figure 1.4
Figure 1.2
Figure 1.1
Figure 1.3
Note: The arrow on the support frame must
point to the water level window on the front
of the humidifier. [Figure 1.1]
Note: Placing the humidifier away from walls
ensures that the humidity sensor and air
inlets function properly.
Note: The alignment sensor on the wick filter
frame senses if the humidifier top is placed
correctly.
4. Place the wick filter frame on top of the
support frame.
Note:
• Remove the wick filters’ plastic
packaging before use. [Figure 1.2]
• Make sure the water pump tube on the
wick filter frame is inserted in the inlet
of the support frame. [Figure 1.3]
5. Place the humidifier top on the water
tank, aligning the Levoit logo with the
water level window. [Figure 1.4]
A
B
C
D
6. Choose a hard, flat location for the
humidifier at least 12 inches / 30 cm away
from any walls. The surface must be
water-resistant.