8
CONTROLS & DISPLAY (CONT.)
No Water Indicator
• Blinks when there is no
water in the tank. After
this indicator blinks for 10
seconds, the humidifier
will turn o. Remove the
humidifier top to refill the
water tank (see Filling &
Refilling, page 10).
• Lights up when the
humidifier top is removed.
Remains on until the
humidifier top is replaced.
Hour Indicator
• Turns on when a timer is set.
Display Lock Indicator
• Turns on when the display is
locked.
• Flashes 3 times when any
other button is tapped to
indicate that Display Lock
is on.
Humidity Percentage
• When a target humidity
is selected, the display
will show the target
humidity. After 3 seconds
of no operation, the target
humidity will flash 3 times,
then show the current
humidity.
Sleep Mode /
Reset Filter Button
• Tap to turn Sleep Mode on
(see page 13).
• Tap , , or to turn
Sleep Mode o.
• Press and hold for 3 seconds
to reset the Check Filter
Indicator.
• You can also reset the Check
Filter Indicator or turn Sleep
Mode on/o in the VeSync
app.
Dry Mode Button
• Tap repeatedly to cycle
through Dry Mode settings:
low, high, and o (see page
13).
• You can also turn Dry Mode
on/o in the VeSync app.
Wi-Fi Indicator
• Turns on, o, or blinks to
indicate pairing status.
See the VeSync in-app
instructions for more
information.
Check Filter Indicator
• Turns on when the wick
filters should be checked
(see Replacing the Wick
Filters, page 16).
To Next Page
Loading...
