Levoit Superior 6000S - CARE & MAINTENANCE (CONT.); Water Filter Sponge Replacement

17
The water filter sponge should be replaced
once a month. To purchase additional water
filter sponges, contact Customer Support
(see page 26).
Replacing the Water Filter
Sponge
Figure 4.4
Figure 4.5
Figure 4.6
To replace:
1. Remove the humidifier top and wick filter
frame.
2. Twist the water filter housing open and
remove the old water filter sponge.
[Figure 4.5]
3. Insert the new water filter sponge and
twist the water filter housing to close.
4. Place the wick filter frame back onto the
support frame, making sure the water
pump tube is inside the support frame
inlet. [Figure 4.6]
5. Place the humidifier top on the water
tank.
1. Turn o the humidifier and remove the
humidifier top.
2. Remove the wick filter frame and pull out
the 4 wick filters from the frame.
[Figure 4.1]
3. Remove the plastic packaging from the
new wick filters and insert them into the
wick filter frame. [Figure 4.4]
4. Place the wick filter frame back onto the
support frame, making sure the water
pump tube is inside the support frame
inlet. [Figure 4.3]
5. Place the humidifier top on the water
tank, aligning the Levoit logo with the
water level window on the water tank.
Turn on the humidifier. [Figure 4.3]
6. Press and hold for 3 seconds to
reset .
CARE & MAINTENANCE (CONT.)