Levoit Superior 6000S - TROUBLESHOOTING (CONT.)

20
If your problem is not listed, please contact Customer Support (see page 26).
TROUBLESHOOTING (CONT.)
Problem Possible Solution
The area around the
humidifier is damp or wet
from condensation.
Humidity may be too high. Turn down the fan speed, turn o
the humidifier, or open a door or window to the room.
Open a window to ensure proper airflow for the humidifier, or
move the humidifier to a more well-ventilated room.
Make sure the water tank is properly in place (see Getting
Started, page 9).
When replacing the water tank, wipe o excess water from
the water tank.
Mold grows inside the
humidifier.
Clean the water tank regularly (see Care & Maintenance,
page 15).
lights up red.
Fill the water tank.
Make sure all parts are installed correctly (see Getting
Started, page 9).
Display shows an incorrect
humidity percentage.
Moisture may have built up inside the humidity sensor. Turn
o the humidifier and allow the sensor to air dry.
If the humidifier is placed within 12 inches / 30 cm of a wall
or in a corner, the humidity sensor cannot provide a proper
reading for the relative humidity in the room.
The humidity sensor will give an improper reading if it is
exposed to dust. Avoid using the humidifier in dusty rooms.
The humidity level isn’t
changing in my room.
Use a higher fan speed setting.
Depending on your environment, the humidifier may take
longer to humidify your air.
Display shows Error Code
“E1”, “E2”.
The humidifier is malfunctioning. Contact Customer Support
(see page 26).