Levoit True HEPA Vital 100 Series - Control Panel Functions; Operation Buttons and Indicators; Getting Started: Initial Setup; Filter Installation Process

5
GETTING STARTED
1. Open the filter cover of the air purifier
and remove the True HEPA filter from its
plastic packaging. [
Figure 1.1 ]
2. Place the filter back into the air purifier
with the pull tabs facing out. [
Figure 1.2 ]
CONTROLS
On/O Button
• Turns the air purifier on/o.
Fan Speed Button
• Cycles through fan
speeds: I (low), II (medium),
and III (high).
Timer Button
• Cycles through timer
options (see page 7).
Check Filter Indicator
• Lights up when the air filter
should be checked (see
Check Filter Indicator,
page 9).
Display O Button
• Turns the display o.
• Tap any button (except )
to turn the display back on.
Figure 1.2
Figure 1.1