Levoit VeSync Classic 300S - Vesync App Setup

Figure 1.10
Figure 1.11
Note: Make sure the nozzle on the water
tank cover is placed over the mist tube, or the
humidier may not work correctly. [Figure 1.11]
Filling & Refilling (cont.)
3. Replace the water tank cover and place
the tank back on the base. [Figure 1.10]
Note: Due to ongoing updates and
improvements, the VeSync app may be slightly
dierent than shown in the manual. In case of any
dierences, follow the in-app instructions.
Note: For Android™ users, choose “Allow” to
use VeSync.
Note: You must create your own VeSync account
to use third-party services and products. These
will not work with a guest account. With a VeSync
account, you can also allow your family and
friends to control your smart humidier.
Note: You can use the VeSync app to connect
your smart humidier to Amazon Alexa or
Google Assistant™. Follow the in-app instructions
to connect VeSync to your voice assistant.
1. To download the VeSync app, scan the QR
code or search “VeSync” in the Apple App
Store® or Google Play Store. [Figure 2.1]
VESYNC APP SETUP
2. Open the VeSync app. If you already have
an account, tap Log In. To create a new
account, tap Sign Up.
3. Follow the in-app instructions to set up your
smart humidifier.
Wi-Fi Connection:
• To disconnect Wi-Fi, press and hold
for 15 seconds until the Wi-Fi
indicator turns o. This will restore the
smart humidier’s default settings and
disconnect it from the VeSync app.
• To reconnect, please follow the
instructions in the VeSync app for
adding a device.
Figure 2.1
EN
10