Levoit VeSync Classic 300S - Page 17

Figure 4.11
Figure 4.12
Figure 4.13
Figure 4.14
g. Remove the float from the base
chamber by pulling up the larger
side of the float [Figure 4.12] and
pulling the shaft out from the float
brackets. One side of the float
brackets is open (U-shaped) to
allow the shaft to be removed.
[Figure 4.13]
f. Flip the tank over and remove
the noise silencer. To remove the
noise silencer, press the release
tab and gently pull away from the
humidifier. [Figure 4.11]
h. Place the float, water filter, and
noise silencer in a small container.
Fill with enough vinegar to cover
them. Soak for 15–20 minutes.
[Figure 4.14]
e. Remove the tank, remove the tank
cover, and pour out any vinegar.
[Figure 4.10]
Cleaning (cont.)
Figure 4.10
EN
17