EasyManuals Logo

Lexicon MPX 100 User Manual

Lexicon MPX 100
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Lexicon Part #070-11935
Unpacking and Inspection
After unpacking the unit, save all packing materials in case you ever need to re-ship. Thoroughly inspect the unit and packing materials for signs of damage.
Report any shipment damage to the carrier at once; report equipment malfunction to your dealer.
Notice
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer's instructions, may cause
interference to radio and television reception. It has been type tested and found to comply with the limits for a Class B computing device in accordance with the specifications in
Subpart J of Part 15 of FCC Rules, which are designated to provide reasonable protection against such interference in a residential installation. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment
OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: reorient the receiving antenna; relocate the computer with respect
to the receiver; move the computer away from the receiver; plug the computer into a different outlet so that the computer and receiver are on different branch circuits. If necessary,
the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet prepared by the Federal
Communications Commission helpful: "How to identify and Resolve Radio/TV Interference Problems." This booklet is available from the U.S. Government Printing Office,
Washington, DC 20402, Stock No. 004-000-00345-4.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la class B prescrites dans le Règlement sur
le brouillage radioélectrique édicté par le ministère des Communications du Canada.
Acknowledgement
All product names indicated by a Trade Mark are registered by their respective manufacturers.
Lexicon Inc.
3 Oak Park
Bedford MA 01730 USA
Telephone 781-280-0300
Fax 781-280-0490
Copyright 1998, Lexicon Inc.
All Rights Reserved.

Other manuals for Lexicon MPX 100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexicon MPX 100 and is the answer not in the manual?

Lexicon MPX 100 Specifications

Audio Inputs and Outputs IconAudio Inputs and Outputs
audio input level-30dBu to +4dBu
audio input impedance500K unbalanced
audio output level+8dBu typical
audio output impedance75Ω for Headphone output
Digital Audio IconDigital Audio
digital audio output20-bit Digital S/PDIF
sample rate44.1kHz
conversion20 bits A/D, 20 bits D/A
Frequency and Distortion IconFrequency and Distortion
frequency response20Hz-20kHz, ±1dB
thd+n<0.05%, 20Hz-20kHz
dynamic range A/A>95dB typical, 20Hz-20kHz, unweighted
dynamic range A/D>100dB typical, 20Hz-20kHz, unweighted
crosstalk45dB
Power and Environment IconPower and Environment
power requirements9VAC wall transformer
operating temperature32° to 104°F (0° to 40°C)
relative humidity95% non-condensing
Weight and Dimensions IconWeight and Dimensions
dimensions19"W x 1.75"H x 4"D (483 x 45 x 102mm)
weight2 lbs, 2 oz (0.959kg)
internal audio data pathDSP: 24-bit

Related product manuals