42
When shipped from the factory, the six-
teen MPX 100 User locations contain dupli-
cates of the following programs:
User
VARIATION
1 Plate 2
2 Gate 9
3 Hall 5
4 Hall 6
5 Chamber 13
6 Ambience 3
7 Room 14
8 Tremolo 1
9 Rotary 9
10 Rotary 15
11 Chorus 3
12 Flange 12
13 Pitch 1
14 Detune 12
15 Delay, Echo 8
16 Delay, Echo 12
User Programs
Reinitialization
Reinitializing the MPX 100 will reset all of
the System Mode parameters to their factory
defaults, replace any programs stored in the
User bank with the factory-loaded preset
copies, and clear any Learned patches. To
do this:
1. Hold the Store button while powering up
the MPX 100. (Store and Tap will flash
rapidly.) Press Tap or Bypass to exit
without reinitializing.
2. Press Store to reinitialize the MPX 100.
To Next Page
Loading...
