49
MIDI Clock
The MPX 100 recognizes MIDI Clock mes-
sages and applies the tempo (40-400 BPM)
to any program which utilizes the Tap-tempo
feature. Connect a MIDI device which out-
puts MIDI Clock (such as the MPX R1 foot
controller or a MIDI sequencer) to the MPX
100 MIDI IN jack, to have the MPX 100
automatically recognize and begin to pro-
cess the MIDI clocks. When you change
tempo on the connected device, the MPX
100 will follow along and adjust its delay
times or rates to match the tempo.
This can be disabled with the MIDI Clock
Receive parameter in System Mode.
MIDI Dumps
MIDI Dumps allow you to back up the 16
User programs, the currently running pro-
gram, or your System Mode settings and
Learned patch assignments, to a storage
device (typically, a sequencer).
MIDI Dumps are performed in System
Mode. To perform a dump of the User pro-
grams, the current program, or all of the
System Mode parameter settings:
1. Press and hold Bypass for 2 seconds.
The Bypass and Store LEDs will blink
slowly to indicate you are in System
Mode.
2. Turn VARIATION to:
14 to dump the User programs
15 to dump the current program
16 to dump the System settings and
Learned patch assignments
3. Press Store to execute the dump.
4. Press Bypass to exit System Mode.
To Next Page
Loading...
Need help?
Audio Inputs and Outputs
Weight and Dimensions
