Lexmark 350 Series - Using the Photo Edit Mode Menu

From here You can
Bluetooth Select:
• Bluetooth Enable to enable or disable Bluetooth communication. For more information, see
“Using Bluetooth technology” on page 0 .
• Discovery Mode to turn the Discovery mode on or off. For more information, see “Using
Bluetooth technology” on page 0 .
• Device Name to view the Device Name and the Universally Administered Address (UAA)
number automatically assigned to your Bluetooth-enabled device.
• Device Address to view the 48-bit address of your Bluetooth-enabled device.
Customize Select:
• Screen Saver to turn the screen saver function on after 30 seconds, on after one minute, or
off.
• Replace Screen Saver Photos to select up to four photos to use as screen savers.
• Hinting to turn hints on or off. Hints are messages on the control panel display that give more
information on the current selection.
Related topics:
• “Maintaining the printer” on page 42
Using the Photo Edit Mode menu
When you are viewing a photo, press to access the Photo Edit Mode menu.
From here You can
Brightness Adjust the brightness of a photo. For more information, see “Adjusting the brightness of
photos” on page 11.
Crop Crop a photo. For more information, see “Cropping photos” on page 11.
Auto Enhance Enhance a photo automatically. For more information, see “Enhancing photos automatically”
on page 12.
Red Eye Reduction Reduce the red-eye effect caused by light reflection.
Colorized Effect Select whether to print a photo in Black & White, Sepia, Antique Brown, or Antique Gray. For
more information, see “Using color effects on photos” on page 13.
Rotate Rotate a photo in 90-degree increments clockwise or counter-clockwise.
Frames Select a style and color to frame a photo. For more information, see “Adding frames to photos”
on page 10.
Related topics:
• “Using the control panel menus” on page 29
Understanding the printer
32