Installing the print cartridge
1 If you are installing a new print cartridge, remove the sticker and tape from the back and bottom of the cartridge.
Warning—Potential Damage: Do not touch the gold contact area on the back or the metal nozzles on the
bottom of the cartridge.
2 Open the access cover.
The print cartridge carrier moves and stops at the loading position, unless the printer is busy.
3 Press down on the cartridge carrier lid to open the cartridge carrier.
Note: If a cartridge is present, remove it.
4 Insert the cartridge.
5 Close the cartridge carrier.
6 Close the access cover.
7 Load paper into the paper support.
8 When prompted on the display, press to print the cartridge alignment page.
Maintaining the printer
47
To Next Page
Loading...
