Lexmark 350 Series - Troubleshooting; Cannot Print from a Digital Camera Using Pictbridge; Incorrect Language Appears on the Display; Ink Level

Troubleshooting
Cannot print from a digital camera using PictBridge
S
OLUTION 1
Enable PictBridge printing on the camera by selecting the correct USB mode. For more information, see the digital
camera documentation.
SOLUTION 2
1 Disconnect the camera.
2 Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera documentation to
determine whether it is PictBridge-enabled.
SOLUTION 3
Use only the USB cable that came with the camera.
Incorrect language appears on the display
1 Press to turn the printer off.
2 Press to turn the printer back on.
3 Press .
4 Press .
5 Press to continue.
6 Press or repeatedly until the language you want appears on the display.
7 Press to save your selection.
Ink level
Message Ink level
Your Color Cartridge will need to be replaced soon.
25% full
Your Color Cartridge will need to be replaced soon.
15% full
Your Color Cartridge will need to be replaced very soon.
5% full
Note: These messages and percentages may not apply to the starter cartridge that shipped with your printer.
Troubleshooting
52