Lexmark 7014-637 User Manual

4-8
7014-xxx
Controller board removal
Warning:
• Always touch a ground before touching the board.
• Handle the board carefully by the edges.
• Never replace the operator panel and controller board without a successful POR in between.
• Never replace the operator panel and the controller board at the same time. Each card contains the printer
settings. When either of these cards is new, it obtains its settings from the other card. Critical factory
settings are lost when both cards are new and are replaced at the same time.
1. Remove the screw (A) from the USB port.
2. Lift the scanner assembly to the raised position.
3. Remove any option cards from the controller board.
CAUTION
This product contains a lithium battery. THERE IS A RISK OF EXPLOSION IF THE BATTERY
IS REPLACED BY AN INCORRECT TYPE. Discard used batteries according to the battery
manufacturer’s instructions and local regulations.
A

Lexmark 7014-637 Specifications

General

Print Technology	Laser
Print Resolution (Black)	1200 x 1200 dpi
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Fax	Yes
Copy Resolution	600 x 600 dpi
Fax Resolution	300 x 300 dpi
Category	Multifunction / All-in-One Printers
Connectivity	Ethernet, USB
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper
Media Sizes Supported	Letter, Legal, Executive, A4, A5, B5
Scanner Type	Flatbed, ADF