Using Lexmark Mobile Assistant
1
Depending on your mobile device, download the Lexmark Mobile Assistant application from either the
Google Play
TM
store or App Store online store.
2 From the control panel, navigate to:
> Network/Ports > > Wireless > > Setup Using Mobile App >
3 Follow the instructions on the display to view the printer ID.
Note: The printer ID is the printer wireless network SSID.
4 From your mobile device, launch the application, and then accept the Terms of Use.
Note: If necessary, grant permissions.
5 Tap Connect to Printer > Go to Wi‑Fi Settings.
6 Connect your mobile device to the printer wireless network.
7 Return to the application, and then tap Setup Wi-Fi Connection.
8 Select a Wi-Fi network, and then enter the network password.
9 Tap Done.
Connecting the printer to a wireless network using Wi‑Fi Protected Setup
(WPS)
Before you begin, make sure that:
• The access point (wireless router) is WPS‑certified or WPS‑compatible. For more information, see the
documentation that came with your access point.
• A wireless network adapter is installed in your printer. For more information, see the instructions that came
with the adapter.
• Make sure that Active Adapter is set to Auto. From the control panel, navigate to:
> Network/Ports > > Network Overview > > Active Adapter > > Auto >
Using the Push Button method
1
From the control panel, navigate to:
> Network/Ports > > Wireless > > Wi‑Fi Protected Setup > > Start Push Button
Method >
2 Follow the instructions on the display.
Using the personal identification number (PIN) method
1
From the control panel, navigate to:
> Network/Ports > > Wireless > > Wi‑Fi Protected Setup > > Start PIN Method >
2 Copy the eight‑digit WPS PIN.
3 Open a web browser, and then type the IP address of your access point in the address
field.
Set up, install, and configure 24
To Next Page
Loading...
