Lexmark B2236 - Exporting or Importing a Configuration File; Networking; Connect Printer to Wi-Fi Network

3 Do either of the following:
• Click Check for updates > I agree, start update.
• Upload the
flash file.
Note: To download the latest firmware, go to www.lexmark.com/downloads, and then search for your
printer model.
a Browse to the flash file.
Note: Make sure that you extracted the firmware zip file.
b Click Upload > Start.
Exporting or importing a configuration file
You can export the configuration settings of your printer into a text file, and then import the file to apply the
settings to other printers.
1 Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
2 From the Embedded Web Server, click Export Configuration or Import Configuration.
3 Follow the instructions on the screen.
4 If the printer supports applications, then do the following:
a Click Apps > select the application > Configure.
b Click Export or Import.
Networking
Connecting the printer to a Wi‑Fi network
Make sure that Active Adapter is set to Auto. From the control panel, navigate to > Network/Ports >
> Network Overview > > Active Adapter > > Auto >
Using the control panel
1
From the control panel, navigate to:
> Network/Ports > > Wireless > > Setup On Printer Panel >
2 Select a Wi‑Fi network, and then enter the network password.
Note: For Wi‑Fi‑network‑ready printer models, a prompt to set up the Wi‑Fi network appears during initial
setup.
Set up, install, and configure 23