Lexmark B2236 - Out of Service Erase; About This Printer; Print Layout Settings

Menu item Description
Device Operations
Panel Menus
Enable*
Disable*
Set the printer to enable access to the control panel menus.
Note: This menu item can be
configured
only from the
Embedded Web Server.
Device Operations
Clear Custom Status
Erase all custom messages.
Note: An asterisk (*) next to a value indicates the factory default setting.
Out of Service Erase
Menu item Description
Printer Memory Last Sanitized
Sanitize all information on nonvolatile memory
Erase all printer and network settings
Erase all shortcuts and shortcut settings
Clear all settings and shortcuts that are stored in the printer.
Note: Erase all shortcuts and shortcut settings is available only in
some printer models.
About this Printer
Menu item Description
Asset Tag Show the serial number of the printer.
Printer’s Location Identify the printer location. The maximum length is 63 characters.
Contact Personalize the printer name. The maximum length is 63 characters.
Send Logs
Cancel
Send
Send diagnostic information to Lexmark.
Print
Layout
Menu item Description
Sides
1‑sided*
2‑sided
Specify whether to print on one side or two sides of the paper.
Flip Style
Long Edge*
Short Edge
Determine which side of the paper (long edge or short edge) is bound when
performing two‑sided printing.
Note: Depending on the option selected, the printer automatically
osets
each printed information of the page to bind the job correctly.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 40