Lexmark B2236dw - Clearing jams; Identifying jam locations; Paper jam in trays; Paper jam in the front door

2 Select a paper source, and then configure the paper size and
type.
Notes:
• For two-sided printing on A4 ‑ size paper, make sure that the
paper size setting in the duplex unit is set to A4.
• For two-sided printing on letter ‑ , legal ‑ , Oficio ‑ , or folio ‑ size
paper, make sure that the paper size setting in the duplex
unit is set to Letter.
Clearing jams
Identifying jam locations
Notes:
• When Jam Assist is set to On, the printer
flushes
blank
pages or pages with partial prints after a jammed page has
been cleared. Check your printed output for blank pages.
• When Jam Recovery is set to On or Auto, the printer reprints
jammed pages.
Jam locations
1 Standard bin
2 Front door
3 Manual feeder
4 Tray
5 Rear door
6 Duplex unit
Paper jam in trays
1 Remove the tray.
2 Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3 Insert the tray.
Paper jam in the front door
1 Open the front door.
Warning—Potential Damage: To prevent damage from
electrostatic discharge, touch any exposed metal frame of
the printer before accessing or touching interior areas of the
printer.
4