7 Align the tray, and insert it.
8 If a different type of paper was loaded than the type previously loaded in the tray, change the Paper Type setting
for the tray from the control panel. For more information, see “Setting the paper size and type” on page 17.
Setting the paper size and type
Note: Trays with matching paper size and paper type settings are automatically linked by the printer. When a linked
tray runs out of paper, the printer draws from another tray.
To change the paper size and type settings:
1 Make sure the printer is on and Ready appears.
2 From the control panel, press .
3 Press until Paper Menu appears, and then press .
4 Press until Paper Size/Type appears, and then press .
5 Press until the correct tray appears, and then press .
6 Press until appears next to the correct size, and then press .
7 Press or to scroll through the list of possible paper types. Highlight the correct type, and then press .
Submitting Selection appears. The printer returns to the Paper Menu.
8 Press twice to return to the Ready state.
Printing guide
Page 17 of 34
To Next Page
Loading...
