Lexmark C530 Color Quality Guide

Menu item Description Settings
Enhance Fine Lines Enables a print mode preferable for files such as architectural
drawings, maps, electrical circuit diagrams, and flow charts
Notes:
• To set Enhance Fine Lines from the software program with
a document open (applicable to Windows users), click
File  Print, and then click Properties, Preferences,
Options, or Setup.
• To set Enhance Fine Lines using the Embedded Web
Server, type the network printer IP address in a browser
window.
On
Off
Color Saver Reduces the amount of toner used for graphics and images.
The amount of toner used for text is not reduced.
Notes:
• Off is the default setting.
• On overrides Toner Darkness settings.
• Color Saver is not supported in PPDS, and only partially
supported by the PCL emulation printer software.
On
Off
RGB Brightness Adjusts brightness in color outputs
Notes:
• 0 is the default setting.
• -6 is the maximum decrease. 6 is the maximum increase.
• This does not affect files where CMYK color specifications
are being used.
-6 to 6
RGB Contrast Adjusts contrast in color outputs
Notes:
• 0 is the default setting.
• This does not affect files where CMYK color specifications
are being used.
0 to 5
RGB Saturation Adjusts saturation in color outputs
Notes:
• 0 is the default setting.
• This does not affect files where CMYK color specifications
are being used.
0 to 5
Color Balance 
• Cyan
• Magenta
• Yellow
• Black
• Reset Defaults
Adjusts color in printed output by increasing or decreasing the
amount of toner being used for each color
Note: 0 is the default setting.
-5 to 5
Color quality guide
Page 2 of 34

Lexmark C530 Specifications

General

Brand	Lexmark
Model	C530
Category	Printer
Language	English