158
Print Area
Purpose:
To modify the logical and physical printable area.
Values:
Note: The Whole Page setting only affects pages printed using PCL 5 interpreter. This
setting has no effect on pages printed using the PCL XL or PostScript interpreters.
If you try to print any data in the non-printable area defined by Normal Print Area,
the printer will clip the image at the boundary defined by the Normal defined
printable area.
See also:
Technical Reference
Print Timeout
Purpose:
To specify the amount of time (in seconds) the printer waits before printing the last page of a print job
that does not end with a command to print the page. The print timeout counter does not start until
Waiting is displayed.
Values:
Normal*
Fit to Page
Whole Page
Disabled The printer does not print the last page of a print job until one of the following occurs:
• The printer receives enough information to fill the page.
• The printer receives a Form Feed command.
• You select Print Buffer from the Job Menu.
1...255 (90*) The printer prints the last page after the specified time. (Your printer may not support
the entire range of values.)
To Next Page
Loading...
