184
Overflow Bin
Purpose:
To designate an output bin as the overflow bin. If Configure Bins is set to Mail Overflow and a specific
output bin is full, the printer automatically diverts printed material to the overflow bin.
Values:
Note: If a user-defined bin is available, it is displayed instead of Bin <x>. The name is
truncated to 14 characters. If two or more bins share the same name, the name
only appears once in the Overflow Bin value list.
Paper Loading
Purpose:
To properly handle preprinted paper loaded in a tray, whether the job is a duplexed job or a single-
sided job.
Values:
First select a paper type:
Then select a value:
Note: If a user-defined name is available, it is displayed instead of Custom <x> Loading.
The name is truncated to 14 characters.
Standard Bin*
Bin <x>
Card Stock Load Colored Loading Ltrhead Loading Bond Loading
Labels Loading Custom <x> Loading Preprint Loading
Duplex Notifies the printer that the specified paper type is loaded properly for duplex printing. If
the printer receives a single-sided job using that paper type, the printer inserts blank
pages as necessary to print the job properly on preprinted forms. This setting may slow
single-sided printing.
Off* Printer assumes preprinted material is loaded for single-sided printing. Duplexed jobs
may not print properly.
To Next Page
Loading...
