Lexmark C750 - Formatting Flash; Held Jobs May be Lost; Hole Punch Waste Full

82
Formatting Flash
What this message means:
The printer is formatting the flash memory.
What you can do:
Wait for the message to clear.
WARNING: Do not turn the printer off while this message is displayed.
Held Jobs may be
lost
What this message means:
The printer memory is too full to continue processing print jobs.
What you can do:
•
Press Go to clear the message and continue printing. The printer frees memory by deleting the
oldest held job and continues deleting held jobs until there is enough printer memory to
process the job.
• Press Stop to clear the message without deleting any held jobs. The current job may not print
correctly.
• Press Menu to open the Job Menu and cancel the current job.
• To avoid this error in the future:
– Delete fonts, macros, and other data stored in printer memory.
– Install more printer memory.
Note: The messages 37 Insufficient Memory and Held Jobs may be lost
alternate on the display.
See also:
Holding a job in the printer; 37 Insufficient Memory
Hole Punch Waste Full
What this message means:
The hole punch box in the finisher is full.
What you can do:
Empty the hole punch box.