60
5
Loosen the four screws at the top of the access cover, but do not remove the screws
completely.
6 Remove the four screws at the bottom of the cover.
7 Slide the cover down to remove it.
Removing memory cards
Complete the following steps to remove printer memory or flash memory cards.
WARNING: Printer memory and flash memory cards are easily damaged by static electricity.
Touch something metal on the printer before you touch a memory card.
1 Remove the system board access cover. See Accessing the printer system board.
2 Locate the memory card you want to remove.
3 Push open the latches on both ends of the connector away from the card.
4 Pull the card straight out of the connector.
5 Place the card in its original packaging, or wrap the card in paper and store it in a box.
6 Reinstall the system board access cover. See Reinstalling the system board access cover.
To Next Page
Loading...
