73
Activating Menu
Changes
What this message means:
The printer is activating changes made to the printer settings.
What you can do:
Wait for the message to clear.
See also:
Disabling the operator panel menus
<x> Alignment
What this message means:
An image transfer unit alignment procedure is in progress and the user is being prompted for a
series of alignment values. The values range from A to L.
What you can do:
•
Enter the alignment value, and then press Select to continue to the next alignment value.
• Press Go or Return to cancel the alignment procedure.
Bin <x> Full
What this message means:
The specified bin is full.
What you can do:
Remove the stack of paper from the bin to clear the message. If you assigned the bin a name,
the bin name is displayed instead of the bin number.
To Next Page
Loading...
