85
ITU/Fuser Maint
What this message means:
The counters that track wear on the image transfer unit and fuser have reached their limit.
What you can do:
Replace the image transfer unit and fuser.
See also:
Replacing the fuser; Replace the image transfer unit and transfer roller
Load Manual
What this message means:
A request for a manual feed job has been sent to the printer. The printer is ready for insertion
of a single sheet into the manual feed slot.
What you can do:
•
Load a sheet of the paper specified in the second line of the display in the manual feed tray or
multipurpose feeder.
• Press Select or Go to ignore the manual feed request and print on paper already installed in
one of the input sources. If the printer finds a tray that has paper of the correct type and size, it
feeds paper from that tray. If the printer cannot find a tray with the correct paper type and size,
it prints on whatever paper is installed in the default input source.
• Press Menu to open the Job Menu and cancel the current job.
See also:
Loading the multipurpose feeder
Load Staples
What this message means:
The printer is trying to staple a print job, but the stapler is empty.
What you can do:
•
Install a new staple cartridge in the stapler.
• Press Go to clear the message and continue printing without stapling.
• Press Menu to open the Job Menu and cancel the current job.
To Next Page
Loading...
