43
Large jobs do not
collate.
Collate is not set to On. Set Collation to On in the Finishing Menu or
through the printer driver.
The job is too complex. Reduce the complexity of the print job by eliminating
the number and size of fonts, the number and
complexity of images, and the number of pages in
the job.
The printer does not have
enough memory.
Add printer memory or an optional hard disk.
Refer to the Setup Guide for information on
selecting memory options to install.
Unexpected page
breaks occur.
The job has timed out. Set Print Timeout to a higher value from the Setup
Menu.
Symptom Cause Solution
To Next Page
Loading...
