Lexmark C752 - Page 30

Repetitive defects guide
Page 1 of 1
Repetitive defects guide
Change cartridge
47.0 mm
(1.85 in)
Change cartridge
96.0 mm
(3.78 in)
Change ITU
101.0 mm
(3.976 in)
Change ITU transfer roll
59.7 mm
(2.35 in)
Change fuser
148.0 mm
(5.827 in)
Match a set of repeating
defects on a print job to
the marks on the one of
the vertical lines. The line
that best matches the
defects on the print job
indicates which particular
part is causing the defect.
For example, the
distance between
these two marks
represents a
repeating defect
that occurs every
96.0 mm, which
means the print
cartridge is the
component that
needs replacing.