Lexmark C752 - Attendance Conditions

PJL
3-67
Attendance Conditions
Attendance conditions require operator intervention. Attendance messages are
returned in this form:
CODE=status code
DISPLAY=display string (in double quotes)
ONLINE=online status
To determine which messages your printer supports, see “Table B-11: PJL Messages
for Attendance Conditions” on page B-17.
Table 3-14: PJL Message for Attendance Conditions
Printer State Status Code Display String Online Status
Intervention required:
insert coating roll
40010
30 Coating Roll Missing FALSE
Intervention required:
insert print unit
40010
30 XXXX
1
Print Unit Missing FALSE
Intervention required:
insert hole punch box
40010 Insert Hole Punch Box FALSE
Intervention required:
insert photoconductor cartridge
40010
Insert PC Cartridge FALSE
Intervention required:
printer upper door open
40021
Cover Open or Close Top Covers or
Insert Cartridge or Close Door
FALSE
Intervention required:
close toner box cover
40021 Close Cover A FALSE
Intervention required:
defective print cartridge or defective
ink cartridge
40021
31 Defective Print Cartridge
31 Defective Cartridge XXXX
FALSE
Intervention required:
unsupported print cartridge
40021
32 Unsupported Print Cartridge FALSE
Intervention required:
unsupported print cartridge
40021
32 Unsupported XXXX Cartridge FALSE
Intervention required:
unsupported cartridge
40021 32 Unsupported Cartridge FALSE
Intervention required:
change cartridge invalid refill
40021
Change Cartridge Invalid Refill FALSE
Intervention required:
cartridge life expired
40021
Cartridge Life Expired XXXX FALSE
1
XXXX represents a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow and Black cartridges,
respectively. For this message, the values for XXXX are returned to indicate which ink cartridges are defective.
2
<d> represents a one-letter designator for each door labeled on the printer.
3
<c> represents a one-letter designator for each cover labeled on the printer.
Note: The Display String is returned in the current language. A display string that is returned is truncated to the DISPLAY
CHARACTER SIZE returned in INFO CONFIG.