PJL
3-6
For detailed information on PJL password protection, see “File and Device
Protection Commands” on page 3-93.
Note: Setting a default PJL password disables the use of PJL DEFAULT and
INITIALIZE commands. (See “DEFAULT Command” on page 3-8 and
“INITIALIZE Command” on page 3-11.)
EOJ Command
The EOJ command signifies the end of a print job.
Syntax:
@PJL EOJ [NAME = "job name"][<CR>]<LF>
Note:
Only use the EOJ command in conjunction with the JOB command.
Parameter:
NAME = "job name"
Use the NAME parameter to assign a character string name to a particular job.
The name may be any combination of printable characters, spaces, or horizontal
tabs up to a maximum of 80 characters, spaces, or tabs. The NAME string may
be different from the NAME string specified in the JOB command. The
job name
must be enclosed in double quotes.
To Next Page
Loading...
