Menu item Description
Paper Saver
Off
2-Up
3-Up
4-Up
6-Up
9-Up
12-Up
16-Up
Specifies that multiple-page images be printed on one side of a paper
Notes:
• Off is the factory default setting.
• The number selected is the number of page images that will print per side.
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Specifies the positioning of multiple-page images when using Paper Saver
Notes:
• Horizontal is the factory default setting.
• Positioning depends on the number of page images and whether they are in
portrait or landscape orientation.
Paper Saver Orientation
Auto
Landscape
Portrait
Specifies the orientation of a multiple-page document
Note: Auto is the factory default setting. The printer chooses between portrait and
landscape.
Paper Saver Border
None
Solid
Prints a border around each page image when using Paper Saver
Note: None is the factory default setting.
Staple Job
Off
On
Specifies whether printed output is stapled
Note: This menu item only appears if the printer is equipped with a stapler.
Hole Punch
Off
On
Specifies whether printed output has punched holes
Note: This menu item only appears if the printer is equipped with a puncher.
Hole Punch Mode
2 holes
3 holes
4 holes
Determines the type of punch finishing performed on a printed output
Notes:
• 3 holes is the US factory default setting. 4 holes is the international factory
default setting.
• This menu item only appears if the printer is equipped with a puncher.
Offset Pages
None
Between Copies
Between Jobs
Offsets pages at certain instances
Notes:
• None is the factory default setting.
• Between Copies offsets each copy of a print job if Collate is set to On. If Collate
is set to Off, each set of printed pages are offset, such as all page 1's and all page
2's.
• Between Jobs sets the same offset position for the entire print job regardless
of the number of copies printed.
• This menu item only appears if a stapler option is installed.
Understanding printer menus
138
To Next Page
Loading...
