Installing the printer on a wireless network (Macintosh)
Make sure to disconnect the Ethernet cable when installing the printer on a wireless network.
Prepare to configure the printer
1 Locate the printer MAC address on the sheet that came with the printer.
2 Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer
on.
1
2
Enter the printer information
1 Access the AirPort options:
In Mac OS X version 10.5 or later
From the Apple menu, navigate to:
System Preferences > Network > AirPort
In Mac OS X version 10.4 or earlier
From the Finder, navigate to:
Applications > Internet Connect > AirPort
2 From the Network Name pop-up menu, select print server [yyyyyy], where the y’s are the last six digits of the
MAC address located on the MAC address sheet.
3 Open a Safari browser.
4 From the Bookmarks drop-down menu, select Show or Show All Bookmarks.
5 Under COLLECTIONS, select Bonjour or Rendezvous, and then double-click the printer name.
Note: The application is referred to as Rendezvous in Mac OS X version 10.2, but is now called Bonjour by Apple
Inc.
6 From the Embedded Web Server, navigate to where the wireless settings information are stored.
Additional printer setup
42
To Next Page
Loading...
