• Remove the specified bins:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the specified bins.
4 Contact Customer Support.
• Touch Continue to clear the message and print without using the specified bins.
Remove paper from standard output bin
Remove the stack of paper from the standard exit bin.
Remove paper from bin [x]
Remove the paper from the specified bin. The printer automatically senses paper removal and resumes printing.
If removing the paper does not clear the message, then touch Continue.
Remove paper from all bins
Output bins have reached their capacity. Remove paper from all output bins to clear the message and continue
printing.
Remove paper from [linked bin set name]
Remove the paper from the specified bin. The printer automatically senses paper removal and resumes printing.
If removing the paper does not clear the message, then touch Continue.
Restore Held Jobs?
Try one or more of the following:
• Touch Continue to restore all held jobs stored on the printer hard disk.
• Touch Do not restore if you do not want any print jobs to be restored.
Remove packaging material, [area name]
Remove any remaining packaging material from the specified location.
Slide finisher to the left
Slide the mailbox or finisher to the left until it clicks into place.
Troubleshooting
186
To Next Page
Loading...
