If you do not know the IP address of the printer, you can:
• View the IP address on the printer control panel in the TCP/IP section under the Network/Ports menu
• Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
Configuring the home screen or idle screen
Changing the home screen background using the printer control
panel
1 From the home screen, navigate to:
Change Background > select background to use
2 Touch .
Changing the home screen background image using the Embedded
Web Server
1 From the Embedded Web Server, click Settings > Solutions > Embedded Solutions > Background and Idle
Screen > Configure.
2 In the Background Images field, select the image you want to use, or click Browse to browse to the graphic you
want to use, and then click Open.
3 Click Apply.
Changing the idle screen settings using the Embedded Web Server
1 From the Embedded Web Server, click Settings > Solutions > Embedded Solutions > Background and Idle
Screen > Configure.
2 Beside Idle Screen Images, click Add.
Note: You can also edit and delete idle screen images.
3 Beside Image, click Browse to browse to the graphic you want to use, and then click Open.
4 Click Apply.
5 Repeat steps 2–4 to add up to ten idle screen images.
6 In the Idle Screen Settings, make sure Enable is selected.
7 In the Start Time field, enter the number of seconds the printer is idle before the idle screen images appear.
8 In the Image Interval field, enter the number of seconds between image changes.
9 Click Apply.
Setting up and using the Home Screen applications
51
To Next Page
Loading...
