Exporting and importing a configuration using the
Embedded Web Server
You can export configuration settings into a text file that can then be imported and used to apply the settings to one
or more additional printers.
Exporting a configuration
1 From the Embedded Web Server, click Settings > Solutions > Embedded Solutions.
2 From Installed Solutions, click the name of the application you want to configure.
3 Click Configure > Export.
4 Follow the instructions in the computer screen to save the configuration file, and then enter a unique file name
or use the default name.
Note: If a JVM Out of Memory error occurs, then repeat the export until the settings file is saved.
Importing a configuration
1 From the Embedded Web Server, click Settings > Solutions > Embedded Solutions.
2 From Installed Solutions, click the name of the application you want to configure.
3 Click Configure > Import.
4 Browse to the saved configuration file, and then load or preview it.
Note: If a timeout occurs and a blank screen appears, refresh the browser, and then click Apply.
Setting up and using the Home Screen applications
56
To Next Page
Loading...
