2
1
4 Flex t he sheets bac k and fo rt h t o loosen them. Do no t f ol d o r creas e
the paper. Straighten the edges on a level surface.
5 Load the paper stack with the recommended printable side faceup.
6 Insert the tray.
7 From the printer control panel, set the paper size and type in the
Paper menu to match the paper loaded in the tray.
Note: Set the correct paper size and paper type to avoid paper
jams and print quality problems.
Loading the 650‑sheet duo tray
The 650‑sheet duo tray (Tray 2) consists of a 550‑sheet tray and an
integrated 100‑sheet multipurpose feeder. The tray is loaded in the
same way as the 250‑sheet tray and the optional 550‑sheet tray, and
supports the same paper types and sizes. The only differences are the
look of the guide tabs and the location of the paper size indicators.
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each tray separately. Keep all other
trays closed until needed.
1
2
3
1 Length guide tab
2 Paper size indicator
3 Width guide tab
3
To Next Page
Loading...
